AP Series

Specifications

 

X Series Analytical Balances

Series W Series
Model AP135W AP125WD AP225WD AP124W AP224W AP324W
Capacity 135 g 120 g / 52g 220 g / 102g 120 g 220 g 320 g
Minimum Display 0.01 mg 0.01 mg / 0.1 mg 0.1 mg
Calibration Weight Built-in
External Calibration Weight Range for Span Calibration 45 to 135.009 g
(100 g)
95 to 120.0090 g
(100 g)
95 to 220.009 g
(200 g)
45 to 120.009 g
(100 g)
95 to 220.009 g
(200 g)
95 to 320.009 g
(300 g)
Repeatability (Standard deviation) 0.05 mg 0.1 mg / 0.02 mg 0.1 mg / 0.05 mg 0.1 mg 0.15 mg
Minimum Weight *1 30 mg 200 mg
Linearity ±0.1 mg ±0.2 mg /±0.05 mg ±0.2 mg /±0.1 mg ±0.2 mg ±0.3 mg
Response Time for race Measurements *2 Approx. 2 sec.
Response Time*3 8 sec. 2 sec. / 8 sec. 2 sec.
USB Host (Type A) Included
USB Device (Type B) Included
Recipe Compounding Included
HPLC Buffer Solution Preparation Included
mol Conversion Function Included
Sample (Concentration) Preparation Included
Inspection Support Function Included
Clock-CAL Included
Ionizer Optional
Weight Approx. 7.0 kg Approx. 6.5 kg
Operating Temperature/Humidity Range 5 to 40°C 20 to 85%*4
Sensitivity Stability Against Temperature Range ±2 ppm/°C (10 to 30°C)
Pan Size ø91 mm
Body Dimensions Approx. 212(W)×411(D)×345(H)mm
(power supply unit included)
Approx. 212(W)×367(D)×345(H)mm
Weight Approx. 7.9kg Approx. 7.0 kg
Display OEL display (dot matrix)
Input/Output Terminal RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

 

X Series / Y Series Analytical Balances

Series W Series Y Series
Model AP124X AP224X AP324X AP124Y AP224Y AP324Y
Capacity 120 g 220 g 320 g 120 g 220 g 320 g
Minimum Display 0.1 mg
Calibration Weight Built-in No
External Calibration Weight Range for Span Calibration 45 to 120.009 g
(100 g)
95 to 220.009 g
(200 g)
95 to 320.009 g
(300 g)
45 to 120.009 g
(100 g)
95 to 220.009 g
(200 g)
95 to 320.009 g
(300 g)
Repeatability (Standard deviation) 0.1 mg 0.15 mg 0.1 mg 0.15 mg
Minimum Weight *1 200 mg
Linearity ±0.2 mg ±0.3 mg ±0.2 mg ±0.3 mg
Response Time for race Measurements *2 2 sec.
Response Time *3 2 sec.
USB Host (Type A) Not Included
USB Device (Type B) Included
Recipe Compounding Not Included
HPLC Buffer Solution Preparation Not Included
mol Conversion Function Included Not Included
Sample (Concentration) Preparation Not Included
Inspection Support Function Included Not Included
Clock-CAL Included Not Included
Ionizer Optional Not Included
Operating Temperature/Humidity Range 5 to 40°C 20 to 85% *3
Sensitivity Stability Against Temperature Range ±2 ppm/°C (10 to 30°C)
Pan Size Φ91 mm
Body Dimensions Approx. 212 (W)×367 (D)×345 (H) mm
Weight Approx. 7.0 kg Approx. 6.5 kg
Display OEL display (dot matrix)
Input/Output Terminal RS-232C (D-sub9P plug)
USB device (Type B) Ionizer
RS-232C (D-sub9P plug)
USB device (Type B)

*1 According to USP Capture 41. This is the tested value by the weight of the balance's capacity of 5%.
*2 The response time value is typical.
*3 Non-condensing.
*4 Non-condensing.

Options

Description
Static Electricity Remover STABLO-AP Ionizer
Electronic Printer EP-100
Electronic Printer EP-110 (Multifunction Printer with Liquid Crystal Display)
Label Roll Paper for EP-100/110 (10 Rolls)
Specific Measurement Kit SMK-601
Display Protective Cover (Set of 5)
USB Cable
AC Adapter (Standard Accessory)
Internal Windbreak Plate
RSIO Interface Cable

External Dimensions of AP Series

AP135W、AP125WD、AP225WD Weight: Approx. 7.9 kg

(AP124W, AP224W, AP324W, AP124X, AP224X, AP324X) Weight: Approx. 7.0 kg
(AP124Y, AP224Y, AP324Y) Weight: Approx. 6.5 kg

For Research Use Only. Not for use in diagnostic procedures.

This page may contain references to products that are not available in your country. Please contact us to check the availability of these products in your country.

Top of This Page