EDX-7000/8000/8100

Energy Dispersive X-ray Fluorescence Spectrometer

Options

EDX-FTIR Contaminant Finder/Material Inspector EDXIR-Analysis software

By measuring the sample with both EDX and FTIR systems and using EDXIR-Analysis to analyze both EDX and FTIR data, elements can be identified automatically with high accuracy.

 

Small Spot Analysis Kit

This kit is especially useful for analyzing trace foreign matters and micro areas.
This combination includes a 0.3 mm diameter collimator and high resolution camera.

Pharmaceuticals Impurities Analysis Method Package for EDX-7000

This package can be used to control g/g-level concentrations of 12 of the 24 elemental impurities specified in ICH Q3D Guideline for Elemental Impurities, including Class 1 elements Cd, Pb, As, and Hg, Class 2A elements V, Co, and Ni, and Class 2B elements Ir, Pt, Ru, Rh, and Pd.
(Option for EDX-7000)

Sample Holder/Stocker for Contaminant Measurement EDXIR-Holder

Measure the Samples Kept in the Holder with EDX and FTIR
The Holder Can Be Used as the Sample Stocker after the Measurement

 

■ Vacuum Measurement Unit

Use this unit for sensitive measurements of light elements. It requires space for installation of a rotary pump and switch box at the side or rear of the desk supporting the main unit.

 

■ Helium Purge Unit

This unit is used for highly sensitive measurements of light elements in liquid samples. Does not include a helium cylinder or regulator.
(Option for EDX-7000)

 

■ Turret Unit

Turret for 12 samples. It permits continuous measurements of samples up to 32 mm in diameter. It improves throughput, especially for measurements in a vacuum or helium atmosphere.

 

■ Screening Analysis Kits

RoHS/ELV Screening Analysis Kit
- With check samples for five elements
RoHS and Halogen Screening Analysis Kit
- With check samples for six elements
RoHS, Halogen, and Antimony Screening Analysis Kit
- With check samples for seven elements

 

■ Mylar Film

Sample-holding film (for heavy element analysis)

 

■ Polypropylene Film

Sample-holding film (for light element analysis)

■ Sample Cells
 

3571 General Open-End X-Cell
(no lid)


(Outer diameter: 31.6 mm, volume: 10 mL)
Polyethylene sample cell for liquid and powder samples.

3529 General X-Cell (with lid)

(Outer diameter: 32 mm, volume: 8 mL)
For liquid samples. Equipped with a relief hole and liquid retainer in case of liquid expansion.

3577 Micro X-Cell

(Outer diameter: 31.6 mm, volume: 0.5 mL)
For trace samples. Recommended for use with a collimator.

3561 Universal X-Cell

(Outer diameter: 31.6 mm, volume: 8 mL)
For liquid and thin-film samples. Equipped with a relief hole and liquid retainer in case of liquid expansion. Equipped with a ring to tightly hold thin-film samples with film.

Specifications

Measurement principle X-ray fluorescence spectrometry
Measurement method Energy dispersion
Target samples Solids, liquids, powders
Measuring range 11Na to 92U (EDX-7000) 6C to 92U (EDX-8000/8100)
Sample size W 300 x D 275 x approx.H 100 mm (excluding radiuses)
Maximum sample mass 5kg (200g per sample when using turret, Gross mass 2.4kg)

 X-ray generator
X-ray tube Rh target
Voltage 4 kV to 50 kV
Current 1 μA to 1000 μA
Cooling method Air-cooled (with fan)
Irradiated area Automatic switching in four stages: 1, 3, 5, and 10 mm diameter
Automatic switching in four stages: 0.3, 1, 3, and 10 mm diameter*1
Primary filters Five types (six, including the open position), automatic replacement

 Detector
Type Silicon drift detector (SDD)
Liquid nitrogen Not required (electronic cooling)

 Sample chamber
Measurement atmosphere Air, vacuum*1, helium (He)*2
Sample replacement* 12-sample turret
Sample observations Semiconductor camera

 Data processor
Memory 2 GB min. (32-bit), 4 GB min. (64-bit)
HDD 250 GB min.
Optical drive Super multi drive
OS Windows 7 (32-bit/64-bit)*3

 Software
Qualitative analysis Measurement/analysis software
Quantitative analysis
Calibration curve method, correction for coexistent elements, FP method,
film FP method, background FP method
Matching software Intensity/content
Utilities Automatic calibration functions (energy calibration, FWHM calibration)
Instrument status monitoring function  
Analysis results tabulation
function
 

 Installation
Temperature
10 °C to 30 °C (temperature fluctuation rate 2 °C/hour max.,
temperature fluctuation range: 10 °C max.)
Relative humidity 40 % to 70 % (no condensation)
Power supply 100-240 V AC ±10 %, 2 A earthed socket
Dimensions W 460 x D 590 x H 360 mm
Weight Approx. 45 kg

*1 Option for EDX-7000/8000/8100
*2 Option for EDX-7000
*3 Microsoft Office is not included.

Installation Example

Vacuum measurement unit (optional) consists of a control switch box and rotary pump.

For Research Use Only. Not for use in diagnostic procedures.

This page may contain references to products that are not available in your country. Please contact us to check the availability of these products in your country.

Top of This Page