Hyper Vision HPV-X2

High-Speed Video Camera

Specifications

Camera Head
Lens Mount Nikon F-mount1)
Image Sensor FTCMOS2 image sensor
Recording Speed2)
(frame rate)
HP mode 10 Mfps, 5 Mfps (fixed) (fps = frames per second)
FP mode 5 Mfps (fixed)
Both modes Variable recording speed between 60 fps and 2 Mfps (in 1/10 ns steps)
Continuous Recording Capacity HPmode 256 frames max.
FP mode 128 frames max.
Resolution HP mode 50,000 pixels (zigzag lattice pixel array)3)
FP mode 100,000 pixels (400 (horizontal) × 250 (vertical))
Color/Gradations Monochrome, 10 bits4)
Exposure Time5) 10 Mfps (fixed at 50 ns), 5 Mfps (fixed at 110 ns)
Variable in a 10 ns interval starting from 200 ns in a range from 60 fps to 2 Mfps
External Trigger Input Two channels (TRIGIN, STANDBY) TTL level (5 V), capable of either positive or negative polarity
Recording Mode Internal trigger, external trigger, continuous trigger
Synchronization Function Capable of synchronized recording with two cameras connected
Optional Outputs Two channels (exposure start timing, trigger detection timing, or other outputs depending on settings)
Trigger Point Setting Can be set to any frame from the second frame onwards.
Interface One 1000 Base-T/100 Base-TX port
External Monitor Output NTSC/PAL output
Data Memory Format 10-bit dedicated format, BMP, AVI, JPEG, TIFF (8-bit and 16-bit formats supported)
Power Supply Unit
Power Rating Single phase 120 V/220-230 V, 200 VA, 50/60 Hz
Required Specifications for the Control PC
Operating System Windows 7/ 8.1 Professional (64-bit)6)
CPU Intel Core i5 or faster
Memory 4 GB or more
HDD 250 GB or more
Screen Size 1,366 × 768 or larger
Interface 1000 Base-T/100 Base-TX
External Recording Device DVD-RW
Other Peripherals Mouse and keyboard
Environmental Conditions
Operating Temperature Range 5 to 40 °C
Operating Humidity Range 35 to 75 % RH with no condensation
Storage Temperature Range 0 to 50 °C
Storage Humidity Range 20 to 80 % RH with no condensation
Size and Weight
Camera Head W160 × D330 × H260 mm, approx. 6.4 kg
Power Supply Unit W150 × D392 × H185 mm, approx. 5.2 kg
Length of Interface Cable Between Camera and Control Computer Approx. 2 m
Length of Cable Between Camera and Power Supply Unit Approx. 2.8 m
Note 1: Shimadzu does not guarantee that all F-mount lenses can be attached.
Note 2: The recording speed is a reference value. It is not guaranteed to be an accurate value for the time interval between recording frames.
Note 3: Stored images will be 400 pixels (horizontal) × 250 pixels (vertical).
Note 4: 10-bit refers to the data format. It does not indicate a guarantee of data precision.
Note 5: These exposure times are rough indications and are not guaranteed as exact exposure time ratios for all recording speeds.
Note 6: Windows is a registered trademark of Microsoft Corporation in the USA and other countries.
Note 7: The FTCMOS2 image sensor used in this camera is manufactured using high accuracy technology, but defective pixels may exist. Note that this is not a defect or failure of the product.

External Dimensions

Camera Head

Camera Head

Power Supply Unit

Power Supply Unit

Units: mm

For Research Use Only. Not for use in diagnostic procedures.

This page may contain references to products that are not available in your country.
Please contact us to check the availability of these products in your country.