- Home>
- Product Gateway>
- Balances & Scales>
- Application Balances>
- EB-340MOC
Product
Balances & Scales
Application Balances
Electronic Moisture Balance
EB-340MOC
Uniform heating with precise temperature control brings accurate result quickly.
Ceramic Heater
Far infra-red radiation is applied onto the surface of sample to heat it evenly. The ceramic plate heater is practically free from failure of the element.
Accurate Temperature Control
PID control of the heater temperature ensures accurate measurement.
Dry-end Point Detection
Microcomputer automatically detects the absolute drying point by finding loss equilibrium point.
Completion of measurement is signaled by buzzer. Water content ratio is automatically displayed. Result can be printed automatically with optional printer.
Time Course Measurement
Ordinary infra-red lamp / EB-340MOC Ceramic heater
With optional electronic printer EP-50, water content ratio during measurement can be obtained by continuous recording.
Temperature distribution on the pan
| Method | Drying with far infrared energy and weighing with an electronic balance | |
|---|---|---|
| Component units | Balance, keypad, and heater | |
| Balance specifications | Capacity: Dual range, 0 to 60g and 0 to 340g | |
| Readability: 0.001g (0 to 60g) and 0.01g (0 to 340g) | ||
| Sample pan: Stainless steel, 90mm diameter | ||
| Moisture analysis specifications | Readability: 0.01% | |
| Measuring range: 0 to 100% moisture or solids | ||
| Measuring accuracy: Z±0.1% (May vary depending on sample and condition) | ||
| Display: Sample weight and percent moisture or percent moisture and time | ||
| Digital output | Optional EP-50 Electronic Printer prints analysis results and can be programmed to print moisture content at user set time intervals. (EP-50's statistics function cannot be used with EB-340MOC) | |
| RS-232C interface via optional IFB-101A interface board, Bi-directional computer link | ||
| Keypad | Numerical keys and nine function keys to set analysis parameters and display features | |
| Heater unit | Heater: Two 150W ceramic heaters | |
| Heater area: 100 x 100mm | ||
| Temperature range of heater surface: Ambient +50 to 500Z¡C | ||
| Dimensions and weight | Balance unit: 208W x 325D x 90H mm, 4.9kg | |
| Heater unit: 200W x 310D x 155H mm, 4.0kg | ||
| Keypad: 120W x 110D x 20H mm, 200g | ||
| Power requirements | 100, 117, 220, 240 V AC Z±10% (Selectable), 50/60Hz | |
| Power consumption: Balance 8VA, Heater 400VA (average approx.) 1000VA at start of heating cycle | ||