Product

Laboratory Instruments

Liquid Chromatograph

LC-2010 Integrated HPLC

LC-2010HT

Specifications for the LC-2010AHT/2010CHT


Item
LC-2010CHT
LC-2010AHT
Pump Pump type Serial dual plunger, micro volume (10mL on primary side, 5mL on secondary)
Flow rate setting range 0.001 ~ 5 mL/min (1.0-35.0 MPa/145-5076psi)
Flow rate accuracy ± 1% (1mL/min, 3.0-10.0 MPa/435-1450psi, using water, and fixed ambient temperature of 20°C , except during gradient solvent delivery), ± 2% (except for above conditions) or ± 2mL/min, whichever is greater
Flow rate precision 0.075% RSD or 0.02min SD, whichever is greater (0.05-2ml/min, 1.0-35.0MPa/145-5076psi, methanol 20°C constant temp, )
LPGE Number of solvents
and setting range		 Up to 4 solvents
0 to 100%, 0.1% steps
Concentration accuracy ± 0.5% (aqueous acetone/water, binary gradient, flow rate 0.1-2.0mL/min, pressure 1.0-20.0MPa/145-2900psi)
Concentration precision ± 0.1% (aqueous acetone/water, binary gradient, flow rate 0.1-2.0mL/min, pressure 1.0-20.0MPa/145-2900psi)
Sampler Injection method Variable volume injection possible (without sample loss)
Injection volume setting range 0.1-100mL (standard), 1-2000mL (optional) (0.1 to 0.9mL in 0.1mL steps, 1 to 2000mL in 1mL steps)
Sample
capacity		 1 ml vials 350
1.5 ml vials 140 210
4 ml vials 100
MTP 4 96- or 384-well micro titer plates
DWP 4 96-well deep-well plates

Injection repeatability

 RSD<0.3% (with 10mL injection)
Carry over 0.01% (under naphthalene analysis conditions)
Injection volume accuracy ± 1 % (50mL, n=6)
Injection volume correction Possible
Sample cooler (LC-2010CHT) 4 to 40°C using Peltier element
Oven Type Block heating/cooling with preheating of the mobile phase
Temperature control precision ± 0.1°C
Temperature control range (Ambient temperature -15°C) to 60°C
UV Detector Light source Deuterium lamp
Wavelength range 190 to 600nm
Bandwidth 8nm
Wavelength accuracy ± 1nm
Wavelength precision ± 0.1nm
Drift 1 x 10-4 AU/h (250nm air cell)
Noise level ± 0.25 x 10-5 AU (for response of 1s, 250nm, air cell)
Cell path length, cell volume 10mm, 8mL (STD flow cell), 5mm, 2.4mL (semimicro flow cell)
2 wavelengths monitoring Any two wavelengths from 190 to 370nm or 371 to 600nm
Controller Display Backlit liquid crystal display (320 x 240 dots), black and white
Memory media 3.5 inch floppy disk drive (disk format, 2HD, MS-DOS)
Input/output terminals 2 x external inputs, 2 x external outputs, 1 x optical link (for chromatopac), 1 x
Operating temperature range 4 to 35°C
Power requirements AC 100V - 240V
Dimensions,Weight W430 X D500 X H605 mm
LC-2010AHT: 47kg
LC-2010CHT: 52kg

page top