- Home>
- Product Gateway>
- Laboratory Instruments>
- Mass Spectrometer Systems>
- GCMS-QP2010 Plus>
- Specifications
Product
Laboratory Instruments
Mass Spectrometer Systems
Gas Chromatograph-Mass Spectrometers (GC/MS)
GCMS-QP2010 Plus
- Top
- Specifications
- Scan/SIM High-speed Data Acquisition Technology
- Fast GC/MS
- Wide Mass Range
- AART (Automatic Adjustment of Retention Time)
- AART (Automatic Adjustment of Retention Time)
- Library search using retention index
- COAST (Creation of Automatic SIM (Scan/SIM) Table)
- GCMS-QP2010 Plus for RoHS
Specifications
[1] Ion source
| Ionization modes | EI (standard); CI, NCI (options) | |
|---|---|---|
| Ionization voltage | 10 eV to 200 eV | |
| Emission current | 5 µA to 250µA | |
| Filament | Dual rhenium coil type | |
| Ion source temperature | 100 °C to 300 °C | |
[2] Mass Spectrometer
| Mass range | m/z 1.5 to m/z 1090 | |
|---|---|---|
| Mass filter | High accuracy quadrupole with pre-rods | |
| SIM mode | 64 channels x 128 groups or FASST | |
| Resolution | R>2M (FWHM) | |
| Stability | ±0.1 u/48 hours (constant temperature) | |
| MS interface | 100 °C to 350 °C | |
[3] Gas chromatograph
| GC unit | Shimadzu GC-2010 | |
|---|---|---|
[4] Detector
| Detector unit | Secondary electron multiplier tube (-10kV conversion dynode, with overdrive lens) |
|
|---|---|---|
| Detector | ACTIVE FILM Multiplier® | |
| Dynamic range | 8 x 106 (electrical) | |
[5] Vacuum System
| Main pump | Dual inlet differential vacuum system (179 L/sec + 185 L/sec, He) |
|
|---|---|---|
| Backup pump | 30 L/min (60Hz) oil rotation pump | |
| Vacuum gauges | Pirani gauge, ion gauge | |
| Column flow | He, 15 mL/min maximum | |
[6] Scan speed
| Maximum scan speed | 10,000 u/sec From m/z 50 to m/z 900, measurement at 0.1 sec intervals in 0.1 u steps Minimum interval 20 ms (maximum 50 scans per second possible) |
|
|---|---|---|
[7] DI Specifications (Option)
| Temperature measurement range | Ambient to 500 °C | |
|---|---|---|
| Heating rate | 5, 10, 20, 40, 80 °C/min. (at maximum output) | |
| Program | Temperature program up to 5 steps | |
| Sample vial size | 1.9 mm I.D. x 8 mm depth | |
[8] Installation conditions (See installation Requirements Manual for details)
| Power requirements | Frequency | 50 / 60 Hz | ||
|---|---|---|---|---|
| GC | AC single phase 110V,115V 1800 VA AC single phase 230V 2600 VA(high power oven) |
|||
| MS | AC single phase 110V to 240V 1000VA | |||
| Voltage regulation | operational power voltage range ±10% specified power voltage range ±5% |
|||
| Set-up environment | Temperature | constant temperature between 18 to 28 °C | ||
| Humidity | 40 to 70% RH (no condensation) | |||
Specifications described above are subject to change without notice.
Example Installation
(PC and printer dimensions will differ according to model.)
The following gives cable and piping lengths:
|