Mass Spectrometer Systems
Various accessories for GCMS-QP2010 Plus series
Specification
Operation
| Operating panel |
Graphical user interface based on PC control |
| Control interface |
Serial port (9,600 bps) |
| Software operating environment |
Windows XP |
| Software |
Linked TDU control software and GCMSsolution (Ver. 2.4 or later) or GCsolution (Ver. 2.3 SU6 or later) |
| Continuous analysis: maximum number of samples |
48 samples |
| Analysis method |
Analysis method can be switched during continuous analysis |
Desorption unit
| Sample tube |
Outer diameter: Approx. 6.35 mm (1/4 inches); Length: 90 mm |
| Heating temperature range |
80°C to 400°C (unit: 1°C) |
| Flow-rate control range |
21 to 150 mL/min (unit: 1 mL/min) |
| Sampling line temperature |
80°C to 350°C (unit: 1°C) |
| Tube handling |
Capping/decapping mechanism based on stepping motor |
Valve
| Warming temperature range |
80°C to 300°C (unit: 1°C) |
| Drive system |
Motor driven |
Cold trap
| Cooling temperature range |
From 50°C below room temperature to 0°C (unit: 1°C)At a valve warming temperature of 260°C to 300°C: From 45°C below room temperature to 0°C |
| Heating temperature range |
80°C to 350°C (unit: 1°C) |
| Trap |
2 (I.D.) × 100 mm; Packing: TenaxTA® |
| Heating time range |
0 to 30 min (unit: 0.01 min) |
TD-GC interface
| Warming temperature range |
80°C to 350°C (unit: 1°C) |
| Carrier gas control |
Electronic control based on AFC |
| Sample splitting |
Splitting possible at the inlet end of the GC column |
Specifications described above are subject to change without notice.
