Product

Laboratory Instruments

TOC Analyzers

On-line Water Quality Analyzer 4110 Series

TOCN-4110 On-line TOC/TN Analyzer

TOCN-4110 On-line TOC/TN Analyzer

The TOCN-4110 is a compact, unique water quality analyzer allowing both TOC analysis by the combustion oxidation / infrared detection method, and TN analysis by the combustion / chemiluminescence detection method, all in a single unit.

Features

  • The TOCN-4110 is a compact, unique quality analyzer allowing both TOC analyses by combustion oxidation / infrareddetection method and TN analysis by the combustion / chemiluminiscence detection method in a single unit.
  • TOC and TN are simultaneously measured and results obtained in as little as 4 minutes.
  • For TOC measurements all known measurements methods (TC,NPOC (standard) TOC=TC-IC (option), TOC=POC+NPOC(option)) are available.
  • For TOC a wide measurement range is variable from 0-5ppm full scale to 0-1000 ppm full scale. Measurements up to 20,000 ppm are possible using on-board dilution function. The TN measurement range is from 0-1 ppm to 0-200 ppm, with the dilution function up to 4000 ppm.
  • Automatic dilution expands the analysis range and allows the reduction in salt, acid, and alkali concentrations to help reduce maintenance and extend catalyst life.
  • A complete line of options designed to accommodate samples with suspended particles, reduce remedial maintenance in on-line TOC/TN measurement. 3 type of sample pretreatment units are available.

  • Automatic calibration is incorporated using standard solutions stored on-board. Automatic calibration is possible even when using the on-board dilution function.
  • On-board carrier/combustion gas purification allows use of air supplied from a compressor, thus eliminating expensive and potentially dangerous cylinder gases.
  • Various input/output and alarm function allows a complete control via control station.

Applications

  • Management of influent and effluent water for wastewater treatment.
  • Management of various plant waters. (i.e.: washing, rinsing, cooling, circulating, boiler, condensate, and other plant liquids)
  • Monitoring of drinking water (source water, in-process water), highly processed water.
  • Monitoring of surface water (rivers, lakes and streams)_
  • Water quality monitoring for regulatory reporting

Specifications

Measurement type NPOC(acidify/sparge removal of IC) and TC (standard). NPOC, TOC (TC-IC) (option). NPOC,TOC (TC-IC and POC + NPOC) (option) Total Nitrogen TN
Measurement principle TOC: Catalytically aided combustion with NDIR detection,
TN: combustion decomposition with chemiluminescence detection.
Measurement range TOC: Variable from 0-5 ppm full scale to 0-1000 ppm full scale (0-20,000 ppm is possible with on-board dilution function).
TN: Variable from 0-1 ppm full scale. 0-4000 ppm is possible with on-board dilution function.
Reproducibility TOC: Within +/-2 % full scale. TN: Within +/-4 % full scale at less than 4 ppm full scale. Within +/-2 % full scale at greater than 4 ppm full scale.
Span stability Within +/-2 % of full scale/day (with temperature fluctuation within 5 °C)
Zero stability Within +/-2 % of full scale/week
Measurement cycle Minimum 4 minutes.
Sample dilution Dilution with syringe, variable sample dilution factor of 2-20
Auto calibration 1-2 point auto calibration possible
Multi-stream option 2 streams with optional sample switching set, Maximum 3 streams with optional flow line switcher
Display LCD 40 characters x 14 lines
Recorder option Recorder width is 100 mm, 6 dot recorder
Printer option Thermal type, 40 columns, chart width with 110 mm.
Analog output Selectable output of 0-1VDC, 0-16 mA or 4-20 mA (insulated output)
Output RS-422 / RS-232C(Option)
Alarm Selectable among upper/lower limit, upper/upper limit and lower/lower limit and instrument trouble alarm
Input signal Sample measurement start, sample measurement stop, calibration start, alarm reset
Carrier gas Air or oxygen, supply pressure: 300 KPa, free of dust, oil mist, water droplets
Power 100,110,115,120,220,230,240 V as ordered; 5 A;50-60 Hz
Construction Indoor wall mounting (optional stand available)



This page may contain references to products that are not available in your country. Please contact us to check the availability of these products in your country.