Product

Optical and Laser Devices

Laser Module & Laser Device

COMPACT GREEN LASER MODULE
“BEAM MATETM” HK-5615

COMPACT GREEN LASER MODULE

Small green laser modules are now attracting more attention from industries as a light source for laser line markers and projectors. To meet increasing market demand, Shimadzu has developed the green laser module “BEAM MATETM” for built-in applications. It is compact in size and has low power consumption. “BEAM MATETM” is a compact green laser module that is competitively priced. Because it works with high accuracy over a wide operating temperature range, from –10 °C to +50 °C, it can be used outdoors.

Features

  • High-quality beam characteristics by our specially-designed microchip laser module technologies
  • Wide operating temperature range from -10°C to +50°C
  • Compact body with built-in control PCB in the laser head
  • High efficiency and / Low power consumption
  • Low operating voltage of 2.4 V - 3.3 V
  • Polarization extinction ratio of 800 : 1 typ.
  • RoHS* compliant products
*RoHS：Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in Electrical and Electronic

(1) Optical Characteristics *1

Item   Condition min. typ. max. Unit
Wavelength lp   531 532 533 nm
Output power Po     5,10,20*5,50*5   mW
Power stability *2 Po Topr= -10 - +50°C -10   +10 %
Transverse mode M2       1.2  
Beam diameter(1/e2)*4 2Wr ⊿ｌ=5m*3 2.0   3.0 mm
Beam divergence (full angle) *4 2θr     0.3 0.4 mrad
Ellipticity Er ⊿ｌ=5m*3     1.2  
Polarization ratio Re     800:1    
*1 Initial values
*2 8hours / 0 to 50Hz
*3 Measurement Distance is 5m from laser aperture
*4 X axial direction
*5 Under development

(2) Absolute Maximum Ratings

Parameter Symbol Ratings Unit
Supply Voltage Vcc +3.5 V
Reverse Supply Voltage VRcc -0.2 V
Input Signal Voltage VIN +3.5 V
Reverse Signal Voltage VRIN -0.2 V
Operating Temperature(*1) Topr -10 - +50 °C
Storage Temperature (*1) Tstg -20 -+75 °C
(*1)Case Temperature

(3) Dimension
Dimension
(4) Electrical Characteristics

Parameter Symbol Ratings Unit
Supply Voltage Vcc 2.4-3.3 V
Supply Current Iop 200 - 400(*1) / 1150(max)(*2) mA
Input Signal Voltage(LASER-ON) VIH (Vcc-0.4) - Vcc V
Input Signal Voltage(LASER-OFF) VIL 0 - 0.4 V
Input Impedance of Signal Port RI 10±1 KΩ
(*1)When the case temperature is 25°C and internal temperature is stabilized.
(*2)A few seconds after power supply is turned on or when the case temperature is in around 50°C.

(5) Pin Description

PIN No. Symbol Color of line Function
1 Vcc Red Power Supply Input
2 GND Black Ground
3 VIN White Signal Input (Laser-ON/Laser-OFF)

(6) Typical Characteristics

1. Output power stability （at temperature range from -10°C to +50°C）

Typical Characteristics

2. Beam diameter (1/e2)（at measurement distance from 0m to 10m）

Beam diameter

3. Polarization ratio（at temperature range from -10°C to +50°C）

4. Current Consumption（at temperature range from -10°C to +50°C）

CAUTION

This product is classified as a class 3B laser. Please refer to IEC 60825-1(2001) when you use.



This page may contain references to products that are not available in your country. Please contact us to check the availability of these products in your country.

page top