- Home>
- Product Gateway>
- Testing & Inspection Machines>
- Powders & Particle Size Analyzers>
- IG-1000>
- Specifications
Product
Testing & Inspection Machines
Powders & Particle Size Analyzers
Single Nano Particle Size Analyzer
IG-1000
Specifications
| IG-1000 | |||
|---|---|---|---|
| Measurement Principle | Induced grating (IG) method | ||
| Measurement Range | 0.5 to 200 nm | ||
| Measurement Time | 30 sec (from the start of measurement to the display of results) | ||
| Sample Liquid Volume | 250 to 300 µL | ||
| Measurement Unit | Light Source | Semiconductor laser (wavelength: 785 nm; output: 3 mW) | |
| Light-receiving Unit | Photodiode | ||
| Cell | Batch cell (material: Pyrex glass*1) | ||
| Output Terminal | Serial output (connector type: D-Sub, 25 pin, female) | ||
| Temperature Setting Range | 7°C to 40°C (cell holder temperature setting range*2) | ||
| Operating Environment | Temperature: 15°C to 35°C | ||
| Humidity: 20% to 80% (without condensation) | Humidity: 20% to 80% (without condensation) | ||
| Power Supply | AC 115 or 230 V ±10% | ||
| Size and Weight | 600 (W) x 400 (D) x 200 (H) mm, approx. 15 kg | ||
*1: Do not use the kind of solvents that may damage Pyrex glass.
* : Measurement is possible as long as the conductivity of the sample liquid does not exceed 400 μS/cm (microsiemens per centimeter). (For example, saline and seawater cannot be used for measurement unless they are greatly diluted.)
Parts Required for Installation
| Micropipette | "Required to inject samples into the cell. Provide a micropipette that can measure out 200 µL with an accuracy of 5%." |
|---|
* Sold by Shimadzu as a special accessory and can therefore be ordered from Shimadzu if necessary.