Product

Features

High Quality Test Data

High-speed data sampling to achieve the true values Ultra high-speed sampling at 1.25m/sec intervals The ultra high-speed sampling at 1.25msec intervals (for 25 seconds) allows highly accurate measurement of the test force in the elastic and break regions to detect any changes in the materials during the test. This function is particularly effective for ceramics and highly rigid new materials. The speed of the ultra high-speed sampling can be selected from 1.25m/sec to 5m/sec. The normal sampling (outside the ultra high-speed sampling range) is also very fast at 10m/sec. With normal sampling, it is also possible to set the sampling intervals by test force and displacement, which are effective for the relaxation and the creep tests. The time can be set in 50m/sec intervals as 50m/sec, 100m/sec, 150m/sec. The test force and displacement intervals can be set using any user-defined values, such as at 1N intervals and at 0.1 mm intervals.

A wide range of test speeds allows for testing of various materials.

A wide range of speed control thanks to the servo-motor The ultra-low-speed type provides a wide crosshead speed range of 0.00005 to 1000mm/min. The crosshead speed range of the standard type is 0.0005 to 1000mm/min. Tests are possible up to the maximum capacity for the entire speed range.

Controller (either can be chosen)

To carry out test conditions settings and data processing using a PC - Smart Controller for MS
To carry out all operations using the test machine main unit - Touch Panel Operation Unit for MO

Trapezium2 software included.