|
|
Balance Factory
 
 |
Balance Factory is the control software for the DBM-G dynamic balancing and measurement control systems.
The new series of DBM-G dynamic balancing machine control software is now available. All versions in this series use this new software to provide comprehensive control of dynamic balancing measurement and data management.
[Features]
 |
Highly-improved visibility and easier to operate than previous control software products. |
|
In addition to a side-by-side 2-pane display mode, standard specifications include a side-by-side 3-pane static display mode, and side-by-side 4-pane static-couple display mode. |
|
A wide variety of optional functionality is available as well, such as statistical calculation, network communications, serial number input, correction magnitude conversion display, measurement results tracing, and manual angle interlock functions. |
|
Older versions of control software can be upgraded. |
[Specifications] |
Standard Specifications
| Item |
Description |
| Measurement Method |
Full Digital Cross Correlation (FDCC) |
| Measurement RPM |
100 to 12,000 rpm |
| Number of Measurement Planes |
1-plane or 2-plane modes |
| Number of Display Panes |
Either four lateral and upper/lower static-couple panes, three lateral and upper/lower static panes, two lateral or upper/lower panes, or one static pane. |
| Display Format |
Vector plus numerical value display mode or numerical value only display mode. |
| Pass/Fail Results |
Circular pass/fail region centered on target value, or sector-shaped pass/fail region for angle and magnitude |
| Compensation Functions |
Zero-compensation, adapter eccentricity compensation, keyway compensation, and input value compensation. |
| Number of Data Files |
512 channels per project |
| Measurement Data Memory Capacity |
15,000 items per channel |
|
Optional Specifications
| Item |
Description |
| Statistical Calculation Software |
Functions for displaying vector distribution diagrams, frequency distribution diagrams, time function diagrams, and statistical calculation charts |
| Correction Amount Conversion Display Software |
Function for converting measurement results to correction amount for drilling |
| Serial Number Input Software |
Attaches workpiece lot and serial numbers to measurement results |
| Time-Trace and Frequency-Trace Software |
Plots calculated results from measurements in progress as a function of time or frequency (rpm) |
| Network Communication Software |
Sends measurement results and settings information via email or copies measurement results to a shared folder |
| Angle-Interlock Display Software |
Function for displaying angle-interlock of unbalance position (Requires separate mounting and wiring of encoder.) |
|
Personal Computer Specifications
| Item |
Description |
| Hardware |
Windows®-compatible
computer |
| Operating System |
Windows®XP Professional |
| CPU |
Intel® Celeron™
700 MHz minimum |
| RAM |
128 MB min. (64 MB for Windows 98) |
| Graphics Resolution |
1024 x 768 min. (recommended) |
| Hard Drive |
300 MB min. available space |
| Serial Port |
At least one available open port |
|
|
|
[Applications]
General rotating parts |
|
