EDXIR-Holder

Sample Holder/Stocker for Contaminant Measurement

Suitable Instruments Shimadzu EDX Series, Shimadzu FTIR Series (with single reflection type ATR)
Suitable Substances Resin piece, metal piece
Part to Attach Samples PP film 25 μm thick and adhesive layer 10 μm thick
EDX Beam Window PP film 5 μm thick
Dimensions of Suitable Samples Max. 5 mm square, min. 1.5 mm square
Thickness of Suitable Samples Recommended value when performing EDX measurement:
Min. 0.5 mm, max. 1.5 mm (sample surface with no protrusions)
Recommended value when performing FTIR measurement:
Min. 0.1 mm, max. 4 mm (sample surface with no protrusions)
Mass of Suitable Samples Max. 1 g
1 Set 25 sheets

For Research Use Only. Not for use in diagnostic procedures.

This page may contain references to products that are not available in your country. Please contact us to check the availability of these products in your country.

Top of This Page