ICPMS-2030 Series

Inductively Coupled Plasma Mass Spectrometer

AS-10 Autosampler
(For automatic analysis of 60 samples)

AS-10 Autosampler

Multiple samples can be analyzed successively. The turntable results in a short path length for sample injection, which can reduce the rinse time.

Vials: 60 15- mL vials
         8 50-mL vials
Size: W290 x D508 x H300 mm (excluding arm)
Power supply: Single-phase 100 V, 50/60 Hz, 50 VA

Note: Requires a power cord.
Note: An additional rinsing port is optional (There is no automatic solvent supply).
         Rinsing Port Expansion Kit for AS-10.

ASX-280 Autosampler
(For automatic analysis of 120 samples)

ASX-280 Autosampler

Vials: 10 50-mL vials (standard samples) or 120 14-mL vials
         80 20-mL vials (rack sold separately)
         42 50-mL vials (rack sold separately)
Size: W355 x D550 x H620 mm (include sample probe)
        W90 x D180 x H60 mm (rough dimensions of power supply unit)
Power supply: 100-240 V AC, 47-63 Hz, 1.9A
Weight: 8.1 kg (main unit)

Note: Requires an ASX Connection Kit ICPMS-2030.

ASX-560 Autosampler
(For automatic analysis of 240 samples)

Autosampler ASX-560

Vials: 10 50-mL vials (standard samples) or 240 14-mL vials
         160 20-mL vials (rack sold separately)
         84 50-mL vials (rack sold separately)
Size: W580 x D550 x H620 mm (include sample probe)
        W90 x D180 x H60 mm (rough dimensions of power supply unit)
Power supply: 100-240 V AC, 47-63 Hz, 1.9 A
Weight: 11.7 kg (main unit)

Note: Requires n ASX Connection Kit ICPMS-2030.

Cooling Water Circulator Set

Cooling Water Circulator Set

Size: W377 x D500 x H615 mm
Power supply: Single-phase 200 V, 50/60 Hz, 2 kVA
Weight: 43 kg

Note: Used to cool the main unit.
Note: Requires a separate chiller Connection Kit.

Automatic Internal Standard Addition Kit

This kit is used for in-line mixing of measurement sample and internal standard solutions and introducing the mixtures into the ICP system.

HFS-5 Hydrofluoric Acid Sample Injection System

This system includes a torch, chamber, extension tube, nebulizer, drain, and their corresponding accessory parts. If purchasing a new system, order this kit and an S2 orifice assembly. Used to directly inject samples that contain hydrofluoric acid. The nebulizer, chamber, and drain system are made using fluoropolymer materials and the injector unit on the torch is made using alumina.

Organic Solvent Injection System

To introduce organic solvents, a mixture of argon and oxygen gases (70% Ar and 30% O2) is injected into the interface unit to prevent precipitation of carbon (C) by the organic solvent. This system includes a Quadruple Torch for Organic Solvents, ICPMS, drain, and their corresponding accessory parts.

Tap Water Connection Kit

This is required if using tap water to cool the main ICPMS-2030 unit. Note: Requires a separate coupler set for tap water connection.

Exhaust Duct Connection Adapter

Noise Reduction Box for Rotary Pumps

Note: Requires Noise Reduction Box Connection Kit for Noise Reduction Box for Rotary Pumps.

For Research Use Only. Not for use in diagnostic procedures.

This page may contain references to products that are not available in your country. Please contact us to check the availability of these products in your country.

Top of This Page