Optical Emission Spectrometer

Installed Environment

Area Approx. 3x2m min.
Temperature Approx. 10°C to 28°C
Humidity 70± RH max.
Note Heat generation approx. 1100 kcal/hour

The instrument highly resistant to dust and other environmental factors. However, avoid installing the data processing unit in an environment subject to vibrations, dust, and strong electrical fields.

Power Supply

200, 220, 230, or 240 V ± 10%, single-phase, 50/60 Hz, 4.0 kVA
Ground Individually grounded 30 W max. Provide near the rear of the instrument.


Argon gas A central supply with switching between at least two cylinders is convenient.
Argon gas purity 99.999% min.
Dew point below –70°C.

For Research Use Only. Not for use in diagnostic procedures.

This page may contain references to products that are not available in your country. Please contact us to check the availability of these products in your country.

Top of This Page