GC-2010 Pro

This product is only available in Europe, Southeast Asia and China.

Flexible lineup for various analysis

Two analytical lines can be operated simultaneously for different applications

Flexible lineup for various analysis

 

 

Achieving excellent reproducibility

Analysis of Grob Test Mixture (Solvent: acetone, each 100 ppm)Analysis of Grob Test Mixture (Solvent: acetone, each 100 ppm)

All units including the column oven, flow controller and sample injection unit are comprehensively optimized at the design stage to achieve world-class repeatability of peak area and peak height. The large vaporization capacity ensures excellent repeatability, even when using solvents that are highly volatile upon injection, such as acetone. Long-term stability of retention time is realized by the new room compensation technology built into the advanced flow controller (AFC).

 
Peak area reproducibility

Peak area reproducibility

 

High-speed analysis

High-speed analysis with narrow bore capillary columns reduces analysis time and improves sample throughput. GC-2010 Pro has excellent flow and pressure control system, which can meet the requirements of rapid analysis with conventional configuration and effectively improve the analysis efficiency.

High-speed analysis of coffee flavoring

High-speed analysis of coffee flavoring

 

Rapid oven heating / cooling

Rapid oven heating / cooling

GC-2010 Pro incorporates a double-jet cooling system, which enables the reduction of cooling time from 450℃ to 50℃ in 3.4min, realizing more efficient and rapid cooling. In addition, with the ability of rapid heating, GC-2010 Pro can significantly reduce the analysis time.

 

Constant linear velocity mode quickly determines separation conditions

The constant linear velocity mode related to the separation performance is recommended for the carrier gas control and can obtain the optimum separation conditions in the shortest time compared with the previous control method by setting the column inlet pressure and flow.

Constant linear velocity mode quickly determines separation conditions

 
 

Gas saver function reduces helium consumption

Reducing running cost by gas saving is an important issue in GC operation. GC-2010 Pro reduces gas consumption by decreasing of split ratio after injection as well as automatic shutdown functions after finishing all analysis.

Gas saver function reduces helium consumption

 

For Research Use Only. Not for use in diagnostic procedures.

This page may contain references to products that are not available in your country. Please contact us to check the availability of these products in your country.

Top of This Page