Co-Sense for LC-MS
Co-Sense for LC-MS Features
Fully Automated Sample Processing
All sample processing, from introduction, separation and concentration of target compounds, desalting and solvent replacement, to transfer to the LC-MS, has been completely automated. This enhances operation efficiency, and eliminates errors associated with performing manual tasks. Online continuous processing also allows reliable, repeatable analysis even with unstable samples.
Higher Sensitivity Measurement
Concentrations of target compounds can be increased several x ten-fold compared with existing LC-MS, enabling acquisition of high S/N MS spectra in a shorter time for higher throughput.
The system is controlled via graphical user interface software. With easy operation, the system operation status is known at a glance.
Co-Sense for LC-MS performs a 3-stage process either manually or automatically.
1. Separation: Separation of target compounds is performed using a preparative column, and the eluate is accumulated in a sample loop.
2. Concentration: The eluate inside the sample loop is introduced into a trap column for adsorption, desalting and concentrating.
3. Purification: Elution solvent is delivered to elute the target compunds from the trap column, and after further purification, the eluate is sent to the MS.