ELSD-LTII

Evaporative Light Scattering Detector

Specifications

A Universal Detector Detects all semi- and non-volatile analytes in your sample, including those transparent to other detectors.
Fully Gradient Compatible Handles any combination of volatile mobile phases and gradients for powerful separations and minimized run times.
Higher Sensitivity than RI and other ELSDs on the market The ELSD-LTII is 10 - 100X more sensitive than RI detectors for all samples and under all mobile phase conditions.
 
Detects all analytes, including semi-volatiles, at near-ambient evaporation temperatures Absolute temperature range (Ambient - 80°C)
Commonly used working range (Ambient - 40°C)
Semi-volatile analytes and compounds that thermally decompose are easily missed with competing detectors. 
Accepts a wide range of mobile phase flows The ELSD-LTII displays excellent signal/noise characteristics over solvent flows from 100µL/min. to 4.0 mL/min.
Single-Mode operation Low temperature operation without accessories, separate operating modes. Most analyses are done using a common set of conditions (Gain 5; Temp 40°C; P 350kPa).
Time program air/nitrogen shutoff A time program method may be used to shut off the inlet gas, ending the problem of wasted gas after work is done.
Unique nebulizer/drift tube design offers protection from "fouling" The nebulizer and drift tube are separated by a glass chamber which protects the evaporation and detection stages from particle buildup. In competing detectors, such buildup contributes to background noise that cannot be solved without maintenance.
Stack other detectors on top of the ELSD-LTII The ELSD-LTII fits perfectly into the modular design of Shimadzu Prominence HPLC hardware. Dimensions: W260 x D550mm x H450 

For Research Use Only. Not for use in diagnostic procedures.

This page may contain references to products that are not available in your country. Please contact us to check the availability of these products in your country.

Top of This Page