Fluorescence Detector

RF-20A/RF-20Axs

RF-20A and RF-20Axs Fluorescence Detector Specifications

  RF-20A RF-20Axs
Light Source Xenon lamp Xenon lamp, Low-pressure mercury lamp (to check wavelength accuracy)
Wavelength Range 0, 200 nm to 650 nm
(Dual wavelength simultaneous monitoring possible)
0, 200 nm to 750 nm
(Dual wavelength simultaneous monitoring possible)
Spectral Bandwidth 20nm
Wavelength Accuracy ±2 nm
Wavelength Reproducibility ±0.2 nm
S/N Water Raman peak S/N 1200 min. Water Raman peak S/N 2000min.
Cell (capacity, pressure resistance, material) 12 µL; 2 MPa (approx. 20 kgf/cm2); SUS316L, PTFE (fluororesin), quartz
Cell Temperature Input Range 4°C
to 40 °C, 1 °C step
Cell Temperature Control Range (Room temperature - 10°C) to 40°C
 

What is a fluorescence detector?
A fluorescence detector excites the sample with excitation light and breaks up the emitted fluorescence light with a fluorescence monochromator. It extracts the required fluorescence wavelengths and measures the intensity with a photomultiplier.

For Research Use Only. Not for use in diagnostic procedures.

This page may contain references to products that are not available in your country. Please contact us to check the availability of these products in your country.

Top of This Page