Analysis of Volatile Organic Compounds (VOC) in Factory Effluent

GC/MS is normally used for the analysis of environmental water. However, GC analysis is possible for samples with low levels of impurity components. This data was obtained from headspace GC analysis of water spiked with VOC components. Ten of the effluent standard items were analyzed using this method. Halides are measured using the electron capture detector (ECD), which offers excellent selectivity and sensitivity. As benzene cannot be detected by ECD, FID detection is required.

Reference

"Examples of the Analysis of VOCs in Effluent by Capillary Gas Chromatograph" (QM-DT008A); text from Water Quality Analysis Seminar (2), Shimadzu Corporation

Headspace GC-ECD Analysis of VOCs in Environmental Water (*: effluent standard item)

Gas Chromatograph

This separation/analysis instrument is widely used for the quantitative analysis of chemical substances. It is used with a detector and column combination that suits the analysis target components.

For Research Use Only. Not for use in diagnostic procedures.

This page may contain references to products that are not available in your country. Please contact us to check the availability of these products in your country.

Top of This Page