inspeXio SMX-225CT FPD HR Plus

Microfocus X-Ray CT System

Principle and Function

System Configuration and Operating Principle

The inspection target (sample) is placed between the X-ray generator and detector, as shown below. Then, the sample is rotated 360 degrees to collect X-ray fluoroscopic data from various angles in order to calculate cross-sectional images.

MPR Display
(Displays any cross section desired)

Multi planar reconstruction (MPR) stacks multiple CT images in a virtual space to display four images - a CT image, mutually longitudinal section images, and a user-selected section image orthogonal to one of the longitudinal section images.

VR Display
Volume rendering (VR) stacks multiple CT images in a virtual space to display a 3D image. Separate 3D image processing software is required for VR display.

Unique Functions

  • Extended Filament Lifetime
    The expected lifetime of filament is extended by 2.5 times by automatically adjusting the current value.
  • Acquisition Mode Switching Function
    Long or short scan times can be specified by combining acquisition mode and exposure time settings.
  • Anti-Pinch Prevention Mechanism
    A finger-pinch prevention mechanism is provided to prevent accidents when closing the sliding door.
  • Door Interlock Mechanism
    The sliding door is equipped with redundant interlock circuits. These ensure X-rays are never emitted when the sliding door is open. In addition, these stop the CT stage from moving when the sliding door is open..
  • CR Scan 
    Computed radiography (CR) can be used to obtain transmission images without distortion in the CT-Z direction by acquiring data only along the vertical center line of the X-ray detector while moving the CT-Z axis vertically.Computed radiography
  • DICOM Conversion Function
    CT Image data can be converted to the DICOM format, which is the world standard for medical imaging. Consequently, this function is essential for analyzing data with medical image analysis software.
  • Collision Sensor
    The expected lifetime of filament is extended by 2.5 times by automatically adjusting the current value.

For Research Use Only. Not for use in diagnostic procedures.

This page may contain references to products that are not available in your country. Please contact us to check the availability of these products in your country.

Top of This Page