iSpect DIA-10

Dynamic Particle Image Analysis System

Specifications

Measurement Method Dynamic image analysis method
Particle Size Measurement Range*1 5 to 100 μm
Number Concentration*2 Coefficient of Variation (CV) ≦ 5 %
Measurement Parameters Particle Size
  • Area circle equivalent diameter, perimeter equivalent diameter, maximum length, maximum perpendicular length, vertical Feret diameter, horizontal Feret diameter, particle perimeter, envelope perimeter
Shape Analysis
  • Circularity, aspect ratio, horizontal bounding rectangle aspect ratio
Other Parameters
  • Particle area, average brightness
Statistical Analysis Items Average, standard deviation, CV, median (50 % value), mode value, user defined % value
Display Items Particle image, histogram, scattergram, cumulative distribution, frequency/integration table, user defined area particle count
Required Sample Size 50 to 1000 μL
Pump Syringe pump, flowrate 0.1 mL/min
Wetted Part Materials Measurement unit: PEEK resin, fluorine resin, quartz, fluorine rubber
Pump unit: Fluorine resin, glass
Power Supply Requirements 115 or 230 V AC, 100 VA, 50/60 Hz
Dimensions/Weight Measurement unit: W223 x D465 x H205 mm, 10 kg
Pump unit: W97 x D190 x H150 mm, 3 kg

*1 Performance guarantee range of area circle equivalent diameter. Measured using a Shimadzu NIST traceable particle size standard sample.
*2 Measured using concentration standard samples specified by Shimadzu.

For Research Use Only. Not for use in diagnostic procedures.

This page may contain references to products that are not available in your country. Please contact us to check the availability of these products in your country.

Top of This Page