Hyper Vision HPV-X2 - Specs
High-Speed Video Camera
10 Mfps (fixed at 50 ns), 5 Mfps (fixed at 110 ns)
|External Monitor Output||
One 1000 Base-T/100 Base-TX port
|Trigger Point Setting||
Can be set to any frame from the second frame onwards.
Two channels (exposure start timing, trigger detection timing, or other outputs depending on settings)
Capable of synchronized recording with two cameras connected
Internal trigger, external trigger, continuous trigger
|External Trigger Input||
Two channels (TRIGIN, STANDBY) TTL level (5 V), capable of either positive or negative polarity
Monochrome, 10 bits4)
FTCMOS2 image sensor
|Resolution : FP mode||
100,000 pixels (400 (horizontal) × 250 (vertical))
|Resolution : HP mode||
50,000 pixels (zigzag lattice pixel array)3)
|Continuous Recording Capacity : FP mode||
128 frames max.
|Continuous Recording Capacity : HP mode||
256 frames max.
|Recording Speed2) (frame rate) : Both modes||
Variable recording speed between 60 fps and 2 Mfps (in 1/10 ns steps)
|Recording Speed2) (frame rate) : FP mode||
5 Mfps (fixed)
|Recording Speed2) (frame rate) : HP mode||
10 Mfps, 5 Mfps (fixed) (fps = frames per second)
|Data Memory Format||
10-bit dedicated format, BMP, AVI, JPEG, TIFF (8-bit and 16-bit formats supported)
Note 1: Shimadzu does not guarantee that all F-mount lenses can be attached.
Note 2: The recording speed is a reference value. It is not guaranteed to be an accurate value for the time interval between recording frames.
Note 3: Stored images will be 400 pixels (horizontal) × 250 pixels (vertical).
Note 4: 10-bit refers to the data format. It does not indicate a guarantee of data precision.
Note 5: These exposure times are rough indications and are not guaranteed as exact exposure time ratios for all recording speeds.
Note 6: The FTCMOS2 image sensor used in this camera is manufactured using high accuracy technology, but defective pixels may exist. Note that this is not a defect or failure of the product.
Power Supply Unit
Single phase 120 V/220-230 V, 200 VA, 50/60 Hz
Required Specifications for the Control PC
Windows 7/ 8.1 Professional (64-bit)1)
Intel Core i5 or faster
4 GB or more
250 GB or more
1,366 × 768 or larger
1000 Base-T/100 Base-TX
|External Recording Device||
Mouse and keyboard
Note 1: Windows is a registered trademark of Microsoft Corporation in the USA and other countries.
|Operating temperature range||
5 to 40 ℃
|Operating Humidity Range||
35 to 75 % RH with no condensation
|Storage Temperature Range||
0 to 50 ℃
|Storage Humidity Range||
20 to 80 % RH with no condensation
Size and Weight
W160 × D330 × H260 mm, approx. 6.4 kg
|Power Supply Unit||
W150 × D392 × H185 mm, approx. 5.2 kg
|Length of Interface Cable Between Camera and Control Computer||
Approx. 2 m
|Length of Cable Between Camera and Power Supply Unit||
Approx. 2.8 m
Power Supply Unit
Download the latest brochure.