DT Series - Specs

Differential Transformer Type Extensometers

DT Series

 

DT50-50-45

Measurement range: Max. 25 mm (4 types)Gauge length: 50 mmAccuracy: Extensometer Class 1 (Within ±3 μm or ±1 % of the specified value, whichever is larger)

Size and Measurement Range for Applicable Samples

Structure

A

Applicable SampleNote) :Rod Diameter (mm)

ø23 to 45

Applicable SampleNote) : Flat Plate W × T (mm)

W 40 (max.) × T 23 to 45

Measurement Range (mm)

25

*1)This Precision is the value when calibrated simultaneously with the amp. Existing amps will require on-site calibration.
*2)The latest version of amp built into the UH-X/FX and AG-X, or the latest ESA amp, is required for compliance with these DT extensometers. Existing amps may not be compliant.
*3)These DT extensometers do not accommodate fractures.
Note: Samples should have enough rigidity so they are not deformed when installing the extensometer.

Read more
Show Less

DT50-10-45

Measurement range: Max. 25 mm (4 types)Gauge length: 50 mmAccuracy: Extensometer Class 1 (Within ±3 μm or ±1 % of the specified value, whichever is larger)

Size and Measurement Range for Applicable Samples

Structure

C

Applicable SampleNote) :Rod Diameter (mm)

ø23 to 45

Applicable SampleNote) : Flat Plate W × T (mm)

W 40 (max.) × T 23 to 45

Measurement Range (mm)

5

*1)This Precision is the value when calibrated simultaneously with the amp. Existing amps will require on-site calibration.
*2)The latest version of amp built into the UH-X/FX and AG-X, or the latest ESA amp, is required for compliance with these DT extensometers. Existing amps may not be compliant.
*3)These DT extensometers do not accommodate fractures.
Note: Samples should have enough rigidity so they are not deformed when installing the extensometer.

Read more
Show Less

DT50-5-45

Measurement range: Max. 25 mm (4 types)Gauge length: 50 mmAccuracy: Extensometer Class 1 (Within ±3 μm or ±1 % of the specified value, whichever is larger)

Size and Measurement Range for Applicable Samples

Structure

C

Applicable SampleNote) :Rod Diameter (mm)

ø23 to 45

Applicable SampleNote) : Flat Plate W × T (mm)

W 40 (max.) × T 23 to 45

Measurement Range (mm)

2.5

*1)This Precision is the value when calibrated simultaneously with the amp. Existing amps will require on-site calibration.
*2)The latest version of amp built into the UH-X/FX and AG-X, or the latest ESA amp, is required for compliance with these DT extensometers. Existing amps may not be compliant.
*3)These DT extensometers do not accommodate fractures.
Note: Samples should have enough rigidity so they are not deformed when installing the extensometer.

Read more
Show Less

DT50-2-45

Measurement range: Max. 25 mm (4 types)Gauge length: 50 mmAccuracy: Extensometer Class 1 (Within ±3 μm or ±1 % of the specified value, whichever is larger)

Size and Measurement Range for Applicable Samples

Structure

C

Applicable SampleNote) :Rod Diameter (mm)

ø23 to 45

Applicable SampleNote) : Flat Plate W × T (mm)

W 40 (max.) × T 23 to 45

Measurement Range (mm)

1

*1)This Precision is the value when calibrated simultaneously with the amp. Existing amps will require on-site calibration.
*2)The latest version of amp built into the UH-X/FX and AG-X, or the latest ESA amp, is required for compliance with these DT extensometers. Existing amps may not be compliant.
*3)These DT extensometers do not accommodate fractures.
Note: Samples should have enough rigidity so they are not deformed when installing the extensometer.

Read more
Show Less

DT50-50-25

Measurement range: Max. 25 mm (4 types)Gauge length: 50 mmAccuracy: Extensometer Class 1 (Within ±3 μm or ±1 % of the specified value, whichever is larger)

Size and Measurement Range for Applicable Samples

Structure

A

Applicable SampleNote) :Rod Diameter (mm)

ø6 to 25

Applicable SampleNote) : Flat Plate W × T (mm)

W 40 (max.) × T 6 to 25

Measurement Range (mm)

25

*1)This Precision is the value when calibrated simultaneously with the amp. Existing amps will require on-site calibration.
*2)The latest version of amp built into the UH-X/FX and AG-X, or the latest ESA amp, is required for compliance with these DT extensometers. Existing amps may not be compliant.
*3)These DT extensometers do not accommodate fractures.
Note: Samples should have enough rigidity so they are not deformed when installing the extensometer.

Read more
Show Less

DT50-10-25

Measurement range: Max. 25 mm (4 types)Gauge length: 50 mmAccuracy: Extensometer Class 1 (Within ±3 μm or ±1 % of the specified value, whichever is larger)

Size and Measurement Range for Applicable Samples

Structure

C

Applicable SampleNote) :Rod Diameter (mm)

ø6 to 25

Applicable SampleNote) : Flat Plate W × T (mm)

W 40 (max.) × T 6 to 25

Measurement Range (mm)

5

*1)This Precision is the value when calibrated simultaneously with the amp. Existing amps will require on-site calibration.
*2)The latest version of amp built into the UH-X/FX and AG-X, or the latest ESA amp, is required for compliance with these DT extensometers. Existing amps may not be compliant.
*3)These DT extensometers do not accommodate fractures.
Note: Samples should have enough rigidity so they are not deformed when installing the extensometer.

Read more
Show Less

DT50-5-25

Measurement range: Max. 25 mm (4 types)Gauge length: 50 mmAccuracy: Extensometer Class 1 (Within ±3 μm or ±1 % of the specified value, whichever is larger)

Size and Measurement Range for Applicable Samples

Structure

C

Applicable SampleNote) :Rod Diameter (mm)

ø6 to 25

Applicable SampleNote) : Flat Plate W × T (mm)

W 40 (max.) × T 6 to 25

Measurement Range (mm)

2.5

*1)This Precision is the value when calibrated simultaneously with the amp. Existing amps will require on-site calibration.
*2)The latest version of amp built into the UH-X/FX and AG-X, or the latest ESA amp, is required for compliance with these DT extensometers. Existing amps may not be compliant.
*3)These DT extensometers do not accommodate fractures.
Note: Samples should have enough rigidity so they are not deformed when installing the extensometer.

Read more
Show Less

DT50-2-25

Measurement range: Max. 25 mm (4 types)Gauge length: 50 mmAccuracy: Extensometer Class 1 (Within ±3 μm or ±1 % of the specified value, whichever is larger)

Size and Measurement Range for Applicable Samples

Structure

C

Applicable SampleNote) :Rod Diameter (mm)

ø6 to 25

Applicable SampleNote) : Flat Plate W × T (mm)

W 40 (max.) × T 6 to 25

Measurement Range (mm)

1

*1)This Precision is the value when calibrated simultaneously with the amp. Existing amps will require on-site calibration.
*2)The latest version of amp built into the UH-X/FX and AG-X, or the latest ESA amp, is required for compliance with these DT extensometers. Existing amps may not be compliant.
*3)These DT extensometers do not accommodate fractures.
Note: Samples should have enough rigidity so they are not deformed when installing the extensometer.

Read more
Show Less

DT50-10-10

Measurement range: Max. 25 mm (4 types)Gauge length: 50 mmAccuracy: Extensometer Class 1 (Within ±3 μm or ±1 % of the specified value, whichever is larger)

Size and Measurement Range for Applicable Samples

Structure

B

Applicable SampleNote) :Rod Diameter (mm)

ø3 to 10

Applicable SampleNote) : Flat Plate W × T (mm)

W 40 (max.) × T 0.2 to 10

Measurement Range (mm)

5

*1)This Precision is the value when calibrated simultaneously with the amp. Existing amps will require on-site calibration.
*2)The latest version of amp built into the UH-X/FX and AG-X, or the latest ESA amp, is required for compliance with these DT extensometers. Existing amps may not be compliant.
*3)These DT extensometers do not accommodate fractures.
Note: Samples should have enough rigidity so they are not deformed when installing the extensometer.

Read more
Show Less

DT50-5-10

Measurement range: Max. 25 mm (4 types)Gauge length: 50 mmAccuracy: Extensometer Class 1 (Within ±3 μm or ±1 % of the specified value, whichever is larger)

Size and Measurement Range for Applicable Samples

Structure

B

Applicable SampleNote) :Rod Diameter (mm)

ø3 to 10

Applicable SampleNote) : Flat Plate W × T (mm)

W 40 (max.) × T 0.2 to 10

Measurement Range (mm)

2.5

*1)This Precision is the value when calibrated simultaneously with the amp. Existing amps will require on-site calibration.
*2)The latest version of amp built into the UH-X/FX and AG-X, or the latest ESA amp, is required for compliance with these DT extensometers. Existing amps may not be compliant.
*3)These DT extensometers do not accommodate fractures.
Note: Samples should have enough rigidity so they are not deformed when installing the extensometer.

Read more
Show Less

DT50-2-10

Measurement range: Max. 25 mm (4 types)Gauge length: 50 mmAccuracy: Extensometer Class 1 (Within ±3 μm or ±1 % of the specified value, whichever is larger)

Size and Measurement Range for Applicable Samples

Structure

B

Applicable SampleNote) :Rod Diameter (mm)

ø3 to 10

Applicable SampleNote) : Flat Plate W × T (mm)

W 40 (max.) × T 0.2 to 10

Measurement Range (mm)

1

*1)This Precision is the value when calibrated simultaneously with the amp. Existing amps will require on-site calibration.
*2)The latest version of amp built into the UH-X/FX and AG-X, or the latest ESA amp, is required for compliance with these DT extensometers. Existing amps may not be compliant.
*3)These DT extensometers do not accommodate fractures.
Note: Samples should have enough rigidity so they are not deformed when installing the extensometer.

Read more
Show Less

Downloads

Download the latest brochure.