A bridge with our customers - Plastic, Recycling and Environmental aspects
UV accessory selection guide for liquids
|Sample||Analytical form and analytical condition||Accessory|
|Transparent Sample||Sample volume: 2.5 mL min.||Standard Sample Compartment + 10 mm Cell|
|Micro-volume measurement||1 mL min.||Semi-Micro Cell + Micro Cell Holder with Mask|
|500 µL min.||Micro Cell + Micro Cell Holder with Mask|
|50 µL min.||Super-micro Cell + Super-micro Cell Holder|
|For automatically measuring samples in multiple cells||MMC-1600 8/16 Series Micro Multi-Cell Holders and Cells|
|Samples with high absorbance, but that are difficult to dilute (short optical path measurement)||Short-Path Cell (1, 2, 5 mm) + Spacer for Short-Path Cell|
|Samples with low absorbance, but that are difficult to concentrate (long optical path measurement)||Long-Path Cell (20, 30, 50, 100 mm) + Long-Path Rectangular Cell Holder|
|For automatically measuring samples in multiple cells||Normal measurement||Multi-Cell Sample Compartment (sample volume: 2.5 mL min.)|
|Small sample volumes (50 µL min.)||MMC-1600 8/16 Series Micro Multi-Cell Holders and Cells|
|Requires temperature control||CPS-100 Six-Cell Thermoelectrically Temperature-Controlled Cell Positioner
(sample volume: 2.5 mL min.)
|For temperaturecontrolled measurements
|Temperature-controlled with water circulation||Constant-Temperature Cell Holder + NTT-2200P Constant-Temperature Water Circulator|
|Thermoelectrically temperature controlled||Normal measurement||TCC-100 Thermoelectrically Temperature-Controlled Cell Holder|
|Multi Samples||CPS-100 Six-Cell Thermoelectrically Temperature-Controlled Cell Positioner|
|Tm Analysis / Temperature control||S-1700 Thermoelectric Single Cell Holder|
|Automatically supplies sample to flow cells
|Requires temperature control (constant-temperature water circulation)||160C Sipper Unit + NTT-2200P|
|Temperature control not necessary||160L/160T/160U Sipper Unit (Select type based on liquid volume.)|
|Requires accurate control of aspiration volume.||Requires temperature control
(constant-temperature water circulation)
|Syringe Sipper CN + NTT-2200P (Select flow cell based on liquid volume.)|
|Temperature control not necessary||Syringe Sipper N (Select flow cell based on liquid volume)|
|For automating measurement of multiple samples||Sipper Unit or Syringe Sipper + ASC-5 Auto Sample Changer|
|Suspension Sample||Absorption measurement of suspension samples||Wavelength range: 240 nm min.||Integrating Sphere Attachment (ISR-2600, ISR-2600Plus, ISR-603)|
|For measuring UV region above 190 nm||SolidSpec-3700DUV|
|Turbidity measurement||Light transmitted light turbidity measurement
(commonly used measurement method)
|10/50 mm Cell + Long-Path Rectangular Cell Holder
(Optical path length of cell depends on test method.)
|Integrating sphere turbidity measurement||Integrating Sphere Attachment (ISR-2600, ISR-2600Plus, ISR-603)|
News / Events
Release of Six New UV-i Selection Brand UV-VIS Spectrophotometer Models
The SolidSpec-3700i/3700i DUV have three detectors which cover the range from ultraviolet to near-infrared. This product is equipped with LabSolutions UV-Vis software.
Shimadzu has released the UV-1900i UV-VIS Spectrophotometer.
The UV-1900i is a double-beam UV-Vis Spectrophotometer using Shimadzu's original LO-RAY-LIGH™ diffraction grating technology.
This product is equipped with LabSolutions UV-Vis software.
FTIR TALK LETTER Vol. 33 is now available.
FTIR TALK LETTER Vol. 32 is now available.
By combining proven LabSolutions IR software and AIMsolution software for controlling the infrared microscope, a highly reliable regulatory compliant software system was created.