HMV-G Series

Micro Vickers Hardness Tester

Select the Type to Suit the Objective

High Resolution Color Camera Type 

If visual inspection of the surface color is required in order to check the condition of the sample surface before testing, the sample can be positioned in the hardness tester, the sample surface can be checked, and then the sample can be tested as is.

 

Stand-Alone Model (HMV-G30)

A color touch panel has been adopted, so the user can easily set the conditions, measure the indentation length, and display the results. There is no need to connect to a PC.

 

In standard testing mode, sample information, shape correction, pass/fail determinations and other detailed conditions can be set before testing. Additionally, fracture toughness tests are supported.

 

Using the digital micrometer head, the G30 series can make depth of hardening graph measurements.

 

The system is equipped with a test conditions assist function that determines the optimal lens or the optimal test force from the anticipated hardness.

For Research Use Only. Not for use in diagnostic procedures.

This page may contain references to products that are not available in your country. Please contact us to check the availability of these products in your country.

Top of This Page