Ceramics Bending Test Jig

Ceramics Bending Test Jig

Substantial Lineup for Ceramic Bending Tests

These test jigs enable 3- and 4-point bending tests in accordance with various JIS, ISO and ASTM standards.

Features

  • Bending tests based on a Room Temperature Bending Test Method for Fine Ceramics JIS R1601 can be performed.
  • Both 3- and 4-point bending test methods are supported.
  • A test jig compatible with a Ceramics High-Temperature Bending Test Method JIS R1604 also is available.

Specifications

Max. test force 5 kN
Applicable standards JIS R1601 (Bending Test Method for Fine Ceramics)
 
3-/4-point bending test jigs for small specimens Distance between 3-/4-point bending supports 10 to 60 mm
Span between 4-point bending punch 10 mm
3-/4-point bending test jigs for ceramics Distance between 3-/4-point bending supports 30 mm
Span between 4-point bending punch 10 mm
3-/4-point bending test jigs for composite materials Distance between 3-/4-point bending supports 30 to 100 mm
Span between 4-point bending punch 10 to 35 mm

Evaluation Targets

Ceramics, Plastics, Metal/machinery

* Appearance and specifications are subject to change without notice.

For Research Use Only. Not for use in diagnostic procedures.

This page may contain references to products that are not available in your country. Please contact us to check the availability of these products in your country.

Top of This Page