High Performance Liquid Chromatograph Triple Quadrupole Mass Spectrometer
Thanks to a heated ESI probe and the UFsweeper III collision cell, the LCMS-8050 achieves a level of sensitivity 30 times that of the LCMS-8030.The UF Technology, the ultrafast measurement technology built into the LCMS-2020 has further evolved, so measurements can now be performed even faster, without sacrificing data quality. At the same time, more compounds can now be measured in simultaneous qualitative and quantitative analysis. The system can be used in a wide range of fields for a variety of applications, such as quantitative analysis which requires high sensitivity, multicomponent simultaneous analysis, and screening.
Food Contact Materials - GRAS or Gross?
Food Contact Materials (FCM) are any materials that come in contact with food during processing, storage, preparation or serving. The safety of these FCMs must be evaluated as they can migrate into the food supply and contaminate the food with compounds like Per-and Polyfluorinated substances (PFAS), mineral oils (MOSH/MOAH), and leachables/extractables from plastics containers (bisphenol A, heavy metals). This webinar will provide an introduction to FCMs, discuss the challenges faced by the food industry, and present the latest analytical technologies for FCMs.
LCMS-8050 Triple Quadrupole Mass Spectrometer
JASIS 2013 LCMS-8050
News / Events
Handbook of Analysis Procedures for EPA method 533, EPA method 537.1 are now available.
The validity of the analysis performed by each laboratory needs to be confirmed by Quality Control (QC). This article section shows the general analytical procedure for fulfilling QC requirements. Note that the procedure could be modified depending on the situation in the lab and analysts.
Shimadzu has released the CLAM-2040, Fully Automated Sample Preparation Module for LCMS
The CLAM-2040 accompanies you on most of the analytical workflow and improves your overall throughput by drastically reducing the sample preparation time. Simply place the blood tubes in position and the CLAM-2040 performs the next steps automatically, from sample extraction, up to the LCMS analysis and data processing.
Per- and Polyfluoroalkyl Substances (PFAS)
Per-and polyfluoroalkyl substances (PFAS) are a group of persistent and harmful chemicals that can be commonly found in the environment globally. These anthropogenic chemicals can come from various sources such as manufacturing, industrial applications, food contact materials and consumer products, and eventually end up and accumulate in the water, soil and living organisms.
Interpretation of LC Chromatograms Facilitated by Mass Detection and the Mass-it™ Function
The LCMS-2050 mass spectrometer includes Mass-it functionality that can overlay compound mass (m/z) information, obtained with the mass spectrometer, onto UV chromatograms to support supplementing qualitative analysis results obtained using a UV detector.
Technical Background for the LCMS-2050, a Compact Mass Detector for LC
The LCMS-2050 single quadrupole mass spectrometer is highly compact in size, yet provides both high-speed and high-sensitivity analysis. Shimadzu’s technology has been condensed into an instrument miniaturized to the utmost.
Shimadzu has updated LC/MS/MS Method Package for Cell Culture Profiling Ver. 3 for LabSolutions LCMS
Version 3 of this method package adds metabolites characteristic of CHO cells, which are frequently used in the manufacture of monoclonal antibodies. Together with existing analytes, this Method Package enables the analysis of 144 compounds in under 20 minutes per sample.
2 Zero hunger
3 Good health and well-being
6 Clean water and sanitation