SGF-3NEII
(Measurement device DBM-GII type use)
SGF-30NEII
(Measurement device DBM-GII type use)
※You can choose a measurement device between GII type (mouse operation type) and TII type (touch screen type).
Ideal for precisely measuring two-plane unbalances in small workpieces.
Shimadzu SGF/STF series dynamic balancing machines offer outstanding precision, reliability and ease of use. They are used widely on production lines to balance small rotating parts. This high performance series offers a level higher sensitivity than the SGB series, allowing highly precise balancing in two planes and making them ideal for ultra-precision high-speed rotating workpieces.
Features
- High-sensitivity designed for small workpieces.
- Capable of balancing workpieces from 0.01 kg to 100 kg
(series includes six models for different weight requirements). - Sensitivity is calibrated using actual workpieces, resulting in extremely small error levels at full-scale and highly precise plane separation.
- Moving coil pickups ensure high signal-to-noise ratios.
Specifications
| Model | SGF/STF-03NEII | SGF/STF-1NEII | SGF/STF-3NEII |
|---|---|---|---|
| Workpiece Weight (kg) | 0.01 to 0.3 | 0.01 to 1 | 0.03 to 3 |
| Max. Workpiece Diameter (mm) | 60 | 200 | 200 |
| Max. Diameter for Belt Drive (mm) | 40 | 150 | 150 |
| Span Across Bearings (mm) | 50 to 450 | 50 to 450 | 50 to 450 |
| Workpiece Shaft Diameter (mm) (1) | 1.5 to 8 | 5 to 15 | 5 to 25 |
| Drive motor (w) | 200 (variable speed) | 200 (variable speed) | 200 (variable speed) |
| Bearing type (1) | V bearing, one set | Roller bearing, one set | |
| Min. Achievable Eccentric Distance(μm) (2) | 0.05 (mass eccentricity for a workpiece of max. weight) | ||
| Min. Achievable Unbalance on One-Plane (g･mm) |
0.002 | 0.005 | 0.02 |
| Testing Speed (rpm) (3) | 700 to 3600 (depending on outer diameter of workpiece) | ||
| Belt drive system (4) | Upward-tangential drive | ||
| Size (W×D×H mm) | 830×900×1500 | ||
| Weight (kg) | 300 | ||
| Power supply | Single-phase 200V 15A 3KVA | ||
| Model | SGF/STF-10NEII | SGF/STF-30NEII | SGF/STF-100NEII |
|---|---|---|---|
| Workpiece Weight (kg) | 0.1 to 10 | 0.3 to 30 | 1 to 100 |
| Max. Workpiece Diameter (mm) | 300 | 700 | 700 |
| Max. Diameter for Belt Drive (mm) | 150 | 200 | 200 |
| Span Across Bearings (mm) | 50 to 450 | 100 to 820 | 100 to 820 |
| Workpiece Shaft Diameter (mm) (1) | 5 to 25 | 10 to 50 | 10 to 80 |
| Drive motor (w) | 200(variable speed) | 750(variable speed) | 750(variable speed) |
| Bearing type (1) | Roller bearing, one set | ||
| Min. Achievable Eccentric Distance(μm) (2) | 0.05 (mass eccentricity for a workpiece of max. weight) | ||
| Min. Achievable Unbalance on One-Plane (g･mm) |
0.05 | 0.3 | 0.3 |
| Testing Speed (rpm) (3) | 700 to 3600 (depending on outer diameter of workpiece) | ||
| Belt drive system (4) | Upward-tangential drive | ||
| Size (W×D×H mm) | 830×900×1500 | 1000×700×1100 | |
| Weight (kg) | 300 | 800 | |
| Power supply | Single-phase 200V 15A 3KVA | 3-phase 200V 30A 10KVA | |
Typical Applications
Turbochargers, AC servo motors, high-speed spindles, gyroscopes, blower/sirocco fans, automotive parts, and rotating parts in general
- Standard machines include one standard bearing. Cost estimates for special bearings are available on request.
- The minimal achievable residual unbalance will vary with the workpiece weight and the test speed. Refer to the attached sensitivity diagram for details.
- Depending on the form and weight of the workpiece, the test speed may be increased beyond the specified range.
- Drive systems other than upward-tangential drive systems are available on request.
Note: Specifications and appearance are subject to change without notice.