VG-03NEII
(Measurement device DBM-TII type use)
VT-1NEII
(Measurement device DBM-GII type use)
※You can choose a measurement device between GII type (mouse operation type) and TII type (touch screen type).
Ideal for measuring one-plane unbalances in thin workpieces.
Shimadzu VG/VT series dynamic balancing machines are dynamic balancing machines designed to measure one-plane unbalances in clutch plates, flywheels, pulleys, gears, and other flat workpieces. Measurement mechanisms are all located below the work surface, which makes loading and removing workpieces extremely easy.
Features
- A wide variety of workpieces can be measured by changing adapters.
- Adapter attachment error can be electrically compensated.
- Automatic workpiece loading and removal systems can also be installed (optional).
- Series includes a range of models to measure workpieces weighing from a few dozen grams up to 100 kilograms.
Specifications
Table Type
| Model | VG/VT-003TNEII | VG/VT-03TNEII | VG/VT-1TNEII |
|---|---|---|---|
| Workpiece weight (Up to 120% including adapter) (kg) |
0.003 to 0.03 | 0.01 to 0.3 | 0.03 to 1 |
| Max. Work piece diameter (mm) | 80 | 200 | 200 |
| Testing speed (rpm) | 2600 | 2600 | 2300 |
| Drive motor (kw) | 0.018（Stepping motor) | 0.06 | 0.06 |
| Min. Achievable residual unbalance (μm) (1) | 0.5 (mass eccentricity for a workpiece of max. weight) | ||
| Min. Achievable unbalance (g･mm) | 0.009 | 0.05 | 0.15 |
| Weight (kg) | 50 | ||
| Power supply | Single-phase 100V 10A 1KVA | Single-phase 100V 15A 1.5KVA | |
Floor-Mounted Type (1)
| Model | VG/VT-1NEII | VG/VT-3NEII | VG/VT-10NEII |
|---|---|---|---|
| Workpiece weight (Up to 120% including adapter) (kg) |
0.03 to 1 | 0.1 to 3 | 0.3 to 10 |
| Max. Work piece diameter (mm) | 200 | 250 | 300 |
| Testing speed (rpm) | 2300 | 2000 | 1200 |
| Drive motor (kw) | 0.1 | 0.4 | 1.5 |
| Min. Achievable residual unbalance (μm) (1) | 0.5 (mass eccentricity for a workpiece of max. weight) | ||
| Minimum Achievable Unbalance (g･mm) | 0.15 | 0.5 | 1.5 |
| Weight (kg) | 300 | ||
| Power supply | 3-phase 200V 10A 3.5KVA | 3-phase 200V 20A 7KVA | |
Floor-Mounted Type (2)
| Model | VG/VT-30NEII | VG/VT-50NEII | VG/VT-100NEII |
|---|---|---|---|
| Workpiece Weight (Up to 120% including adapter) (kg) |
1 to 30 | 2 to 50 | 3 to 100 |
| Max. Workpiece Diameter (mm) | 500 | 600 | 600 |
| Testing Speed (rpm) | 1000 | 600 | 600 |
| Drive motor (kw) | 2.2 | 3.7 | 3.7 |
| Min. Achievable Eccentric Distance (μm) (1) | 0.5 (mass eccentricity for a workpiece of max. weight) | ||
| Minimum Achievable Unbalance (g･mm) | 5 | 10 | 15 |
| Weight (kg) | 700 | ||
| Power supply | 3-phase 200V 30A 10KVA | 3-phase 200V 50A 18KVA | |
- The minimal achievable residual unbalance will vary with the workpiece weight and the test speed. Refer to the attached sensitivity diagram for details.
Note: Specifications and appearance are subject to change without notice.