Analysis Routine (updated monthly) features the latest application videos, recommended/trending applications, and content that can help lab managers boost productivity. Make routine work more efficient by keeping up with the latest analytical solutions with Analysis Routine.
Hot Applications
User Benefits:
・Automation of the sample preparation process reduces manual work by the analyst and enables sample preparation with high repeatability and reduction of working time.
・Contaminants can be removed safely because handling of reagents is simplified.
・Accurate qualitive analysis of microplastics in environmental water is possible by utilizing the Shimadzu UV-Damaged Plastics Library.
High-Speed Tensile Testing and Fracture Surface Analysis of EV Drive Motor Shaft Produced by Radial Forging
User Benefits:
・It is possible to evaluate the velocity (strain rate) dependence of mechanical properties and identify inclusions in metallic materials.
・High-speed tensile tests at up to 20 m/s can be conducted by HITS-TX.
・EPMA enables elemental analysis on uneven fracture surfaces to be performed as is.
Analysis of Sintered Ore for Steel Making
User Benefits:
・The mineral structure of sintered ore can be investigated by quantitative mapping of Al, Mg, Si, Ca, and Fe.
・Useful in research on the composition of the calcium ferrite phase.
・Useful in research on effective utilization of high phosphorus iron ores by quantitative analysis of trace P.
High-Speed Tensile Testing and Fracture Surface Analysis of EV Drive Motor Shaft Produced by Radial Forging
User Benefits:
・It is possible to evaluate the velocity (strain rate) dependence of mechanical properties and identify inclusions in metallic materials.
・High-speed tensile tests at up to 20 m/s can be conducted by HITS-TX.
・EPMA enables elemental analysis on uneven fracture surfaces to be performed as is.
Analysis of Sintered Ore for Steel Making
User Benefits:
・The mineral structure of sintered ore can be investigated by quantitative mapping of Al, Mg, Si, Ca, and Fe.
・Useful in research on the composition of the calcium ferrite phase.
・Useful in research on effective utilization of high phosphorus iron ores by quantitative analysis of trace P.
Assessment of Jetanizer and Quantitative Analysis of CO2 and CH4 in the Atomosphere
User Benefits:
・Simplification of the analytical system for CO and CO2 utilizing the Jetanizer coupling with GC-FID.
・Low-cost system achieved with adding the Jetanizer to FID-2030 that is already working.
・N₂ as carrier gas available.
GC/MS and LC/MS Analysis of Metabolites in Hepatitis Model Mouse Serum
User Benefits:
・Multi-omics Analysis Package can be used to analyze data obtained by GC/MS and LC/MS measurements.
・Multi-omics Analysis Package enables multivariate analysis, including principal component analysis.
・Acquired data can be easily visualized using a metabolic map template.
Compression Testing of Toner under Room Temperature and High-Temperature Environments
User Benefits:
・Compression testing in accordance with JIS Z 8844 is available.
・It is possible to obtain the deformation strength for specimens that do not show clear fracture behavior.
・Compression testing is possible not only at room temperature but also in high-temperature environments.
Application Videos
Boost Productivity
Effortless Method Development with LabSolutions MD
LabSolutions MD enables effortless exploration of optimal conditions through each phase of method development, such as screening and optimization. In the screening phase, LabSolutions MD allows selecting mobile phases and columns with a single click and analysis schedules are automatically generated. In the optimization phase, gradient conditions that meet the resolution criteria are automatically explored. This enables anyone to easily nd optimal conditions without relying on experience.
FlexiFocus Slides: Chemically Modified Sample-Focussing MALDI Targets to Enhance Productivity and Throughput
The FlexiFocus™ slides are chemically modified sample-focussing MALDI targets that have been developed to facilitate high-throughput, automated analysis on the Shimadzu benchtop MALDI-TOF instruments. They consist of a hydrophobic surface surrounding small exposed, hydrophilic regions which facilitate sample containment and focussing in the centre of the spot. They are available with either 48- or 96- sample positions to satisfy different throughput requirements. They are compatible with all common MALDI matrices and solvents, and can be used in various applications. They have also been shown to exhibit enhanced sensitivity performance depending on the sample and application.
