STABLO-AP Ar - Specs
Argon Gas Environments Static Remover (Ionizer)
STABLO-AP Ar
Argon Gas Environments Static Remover (Ionizer)
| Ion Generation Method | AC corona discharge method |
|---|---|
| Ion Balance*1*2 | ±10V |
| Effective Static Removal Range*2 | Approx. 300 mm from the outlet |
| Static Elimination Time*1*2 | Approx. 2.5 second Time from ±1000 V to ±100 V (Distance 100 mm) |
| Usage environment | Argon gas environment Temperature: 0 ºC to + 40 ºC Dew-point temperature: -76°Cdp or less (water concentration 1 ppm or less) Oxygen concentration: 1 ppm or less |
| Electrode Probes | Tungsten (durability: 30,000 hours) |
| Rated electric power supply | DC 24 V, 0.1 A |
| Input Power Supply | AC 100 V - 240 V, 0.58 A, 50/60 Hz*3 |
| Pollution Degree | 2 |
| Overvoltage category | Category II |
| Altitude | Maximum 2,000m |
| Installation Site | Device may only be used indoors |
| Weight | Approx. 710 g (Main unit: 395 g, Stand: 315 g) |
| Size (unit) | Approx. 120 x 87 x 49 mm (Excluding protruding parts) |
*1: Shipment inspection standard measured using a CPM (charged plate monitor) 150 × 150 mm plate 20 pF installed at 100 mm from the center of the outlet.
*2: When using the ionizer in an environment with airflow, such as a purge-type glove boxes, make sure to direct the ionizer outlet along the direction of the airflow.
*3: The Input Power Supply may change without notice.